POPO ENCLOSURE CASE 3.1
Support: NGFF SSD/ NVME SSD
SPEED
- USB C 3.1 Gen 2 10Gbps to M.2 NVME SSD
- USB C 3.1 Gen 2 6Gbps to M.2 SATA SSD
When connected to a Thunderbolt 3 or USB 3.1 Gen 2 port, both the read and write speeds can reach up to 900 MB/s.
NOTE: The actual transfer speed depends on the speed of your SSD, USB Port type, your computer performance, and NVME /SATA media used etc.
Overheating Protection:
If your SSD overheating when transfer large of data, enclosure will run the overheating protection auto and goes into read-only mode or stop the transfer or down the speed of transfer data. Avoiding your SSD damage due to overheating and improving the life of your SSD.
:- Computer have different show about overheating protection. Once your SSD cool down then can use again. Your file won’t lose.
Tool-Free:
USB C to M.2 NVME SATA Enclosure tool-free design allows the quick installation of an M.2 NVME or M.2 SATA SSD in just a couple of seconds.
Slide and open the aluminum cover following the direction of arrow, then insert the SSD and secure with the notched, rubber SSD retention peg, then reinstall the cover.
SUPPORT M.2 NVME & SATA SSD: NOTE: The first time you use m.2 solid state drive SSD, you need to format the disk.
Not the enclosure’s problem. The M.2 SSD enclosure support dual protocol of NVME and SATA, 10Gbps NV Me M-Key / B+M Key M.2 SSD and 6Gbps SATA NGFF B+M Key M.2 SSD. DO NOT SUITABLE FOR SATA B Key SSD!!!! Fit for the size of 2230/2242/2260/2280 up to 2TB capacity.
SUPPORT USB & USB C DEVICES: NOTE: The type c interface only support phone with OTG function or laptop with Thunderbolt 3 function port. This M.2 SSD enclosure come with USB C to USB C cable; USB C to USB A cable. Offering an easy way to connect M.2 SSD with your USB-C (Thunderbolt 3 Compatible) laptops for file backup, disk upgrade, clone, data recovery and storage expansion. Support connect PCs, smart phones, laptops, smart TVs, smart routers, PS4 and other devices. Max support 2TB capacity.