APC 1KV UPS SMC1000I 600Watts 1000VA Smart UPS LCD 230V
- Output power capacity – 600 Watts / 1.0 kVA
- Max Configurable Power (Watts) – 600 Watts / 1.0 kVA
- Nominal Output Voltage – 230V
- Output Voltage Distortion – Less than 5% at full load
- Output Frequency (sync to mains) – 50/60Hz +/- 3 Hz
- Topology – Line Interactive
- Waveform type – Sine wave
- Output Connections – (8) IEC 320 C13 (Battery Backup)
- Nominal Input Voltage – 230V
- Input frequency – 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections – IEC-320 C14
- Input voltage range for main operations – 180 – 287 V
- Input voltage adjustable range for mains operation – 170 – 300 V
- Other Input Voltages – 220, 240
Batteries & Runtime
- Battery type – Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time – 3 hour(s)
- LED status indicators quickly understand unit and power status with visual indicators
- Hot-swappable batteries ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Disconnected battery notificationWarns when a battery is not available to provide backup power.
Serial connectivityProvides management of the UPS via a serial port.
USB connectivityProvides management of the UPS via a USB port (not available on all models).
LED status indicatorsQuickly understand unit and power status with visual indicators.
Audible alarmsActively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
Network manageableProvides remote power management of the UPS over the network.