LIAN LI LANCOOL 215 X

Unobstructed Airflow

LANCOOL 215 features two pre-installed 200MM ARGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.

Equiped with two 200mm ARGB fan and one 120 fan at the rear. The mesh panel in the front creates a great airflow without bring the dust in. Include top and bottom honeycomb filtered vents, wide fan/radiator combination support, and multiple cable management solutions for the DIY users to fit their configuration.

OPTIMIZED THERMAL MANAGEMENT

MESH INTAKES SPANNING THE FRONT PANEL GUARANTEE
SUFFICIENT AIRFLOW IN AND OUT OF THE SYSTEM.

HONEYCOMB VENTS

The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.

MULTI COOLING
SYSTEMS SUPPORT

Supports a maximum of 7 fans and radiators
in various sizes and configurations. You make the call!

Front Panel (interior)	3 x 120MM fans 2 x 140MM fans 280MM radiator with max 70MM thick 360MM radiator with max 70MM thick
Top Panel	2 x 120MM fans 2 x 140MM fans 240MM radiator with max 55MM thick 280MM radiator with max 55MM thick
Bottom Panel (on top of the PSU shroud)	2 x 120MM fans

ULTIMATE COOLING SYSTEM SCENARIO

With two 200MM fans mounted outside of the frame,you still have enough room  to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don’t worry about the fan screws, they won’t interfere with the radiator.

ARGB SYNCHRONIZATION
WITH THE MOTHERBOARD

Pressing the LED button 3 seconds passes over the control of the LED lights
to the motherboard, and press the button 3 seconds again to regain control of the lights.

LENTY OF SPACE FOR CABLE MANAGEMENT

The 22MM thick space behind the motherboard ensures the cables fit in well.

PRE-INSTALLED FAN HUB

The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.

KEEP THE CABLE NICE AND NEAT

The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management.

TORAGE & MOTHERBOARD SUPPORT

ROOM FOR 4 STORAGE DRIVES

REMOVABLE/ADJUSTABLE CAGE SUPPORTS
2 X 3.5” HDD OR 1 X 3.5” HDD + 1 X 2.5” SSD

2 X SSD SUPPORT BEHIND THE MOTHERBOARD

E-ATX MOTHERBOARD COMPATIBLE

Fits motherboards with a maximum width of 280MM.

SIMPLE DUST MANAGEMENT

The trendy mesh design at the front panel
provides filtration for dust coming from outside the chassis.
Moreover, the magnetic dust filter on the top
and the removable full-length dust tray
at the bottom protect the internal components
from dust accumulation without impeding the airflow.